The CRC100 is a standalone single door controller suitable for controlling doors, barriers, rising bollards, turnstiles, etc., by validating cards, key fobs, vehicle tags, PINs, etc. that are presented via a reader interface.
The CRC100 supports both Clock & Data and Wiegand interface formats. It can be used to control access via a single door/barrier and provides a range of standalone access control features.
Two versions of CRC100 are available:
The CRC100-S has a large card capacity and is typically used with a site code and sequential card numbers counting from zero or one.
The CRC100-R is designed to work with random card numbers and is therefore suitable for extending or replacing existing controllers.
Benefits
-
Compact size allows it to be fitted in small spaces
-
Will support existing card numbering systems
-
Block validation and voiding for quick and easy card management
-
Fast and simple card verification
-
Can be used with card capture reader
-
Variable output relay timing to match most applications
-
Prevents card misuse
-
Can be used for magnetic stripe, proximity, smart card and long range readers
Specifications
|
Electrical |
|
|
Supply Voltage: |
9V to 24V DC (non-polarised) |
|
Current Requirement: |
33 mA quiescent, 133 mA with relay activated |
|
Reader Supply: |
5V DC (100mA maximum) |
|
|
|
|
Physical |
|
|
Display: |
2 lines x 8 character LCD |
|
Keypad: |
4 button ‘Mode/Program’, ‘Enter’, ‘Up arrow’ (select/digit value) and ‘Right arrow’ (digit select) |
|
Dimensions (mm): |
110 x 80 x 35 (H x W x D) |
|
Cable Termination: |
Screw terminals |
|
Weight: |
212 grams |
|
|
|
|
Environmental |
|
|
Operating Temperature: |
0oC to 40oC |
|
Storage Temperature: |
-20oC to 70oC |
|
Relative Humidity: |
95% non-condensing |
|
|
|
|
Capacity |
|
|
CRC100-S: |
10,000 sequential card numbers (0 - 9999) |
|
CRC100-R: |
1,600 random card numbers |
|
|
|
|
Inputs |
|
|
Reader: |
5-wire reader interface for Clock & Data (ABA Track 2) & Wiegand formats. |
|
Arming: |
Ground activated input. Open-circuit arming (shared input with ‘Request to Exit’). |
|
Request to Exit: |
Ground activated input operating the latch relay (shared with ‘Arming’). |
|
|
|
|
Outputs |
|
|
Latch Relay: |
Change-over contacts rated at 2A at 30V DC. Programmable operate time 0.5 to 30 seconds. |
|
Auxiliary Output: |
Open-collector output for auxiliary control. |
|
|
|
|
Cabling |
|
|
CRC100 to Reader: |
Belden 9536 or equivalent (100m maximum) |